Different methods for laser marking are systematized and discussed in the paper. today in the practice there are many different methods that could be used to realise high quality on the workpiece. Methods for pulsed-laser operation a laser operating in cw mode has constant output power as a function of time. this is the result of reaching a steady-state condition where balance is maintained between the laser cavity gain (dictated by the population inversion which is proportional to the pumping rate) and loss (which includes the cavity. Summary of laser cladding methods an introductory technical report published in february 2008, laser cladding basics, compares the main laser cladding methods. as can be seen by the table below, co 2 is the best method for laser cladding in terms of it high wavelength and its high beam quality, whereas direct diode has a low wavelength and low.
Therefore, for the laser cutters with the short stroke and small cutting area, the ball screw is the first choice of the driving method. its accuracy, speed and cost are well accepted. however, for the application of long stroke (≥3m) and high speed (≥60m/min), it is not the optimal method to integrate the ball screwdriver.. Laser, a device that stimulates atoms or molecules to emit light at particular wavelengths and amplifies that light, typically producing a very narrow beam of radiation.the emission generally covers an extremely limited range of visible, infrared, or ultraviolet wavelengths. many different types of lasers have been developed, with highly varied characteristics.. Laser diffraction analysis, also known as laser diffraction spectroscopy, is a technology that utilizes diffraction patterns of a laser beam passed through any object ranging from nanometers to millimeters in size to quickly measure geometrical dimensions of a particle. this process does not depend on volumetric flow rate, the amount of particles that passes through a surface over time..
0 komentar:
Posting Komentar